印刷廠廢氣處理催化燃燒設備是近幾年廣泛應用于印刷車間廢氣處理，同時也是多數環評上指定使用該設備對印刷廠產生的廢氣進行處理后達標排放。小編簡單介紹下催化燃燒設備在印刷廠中的應用。

The catalytic combustion equipment for printing factory exhaust gas treatment has been widely used in printing workshop exhaust gas treatment in recent years, and it is also designated in most environmental impact assessments to use this equipment to treat the exhaust gas generated by printing factories and achieve standard emissions. The editor briefly introduces the application of catalytic combustion equipment in printing factories.

印刷廠的廢氣主來源于印刷過程中采用的油墨、甲苯、汽油、酒精等有機溶劑揮發。尤其是在印刷品干燥的過程中，油墨所散發的揮發性組分的總含量占70%-80%，不進處理排放氣體不僅污染周圍環境，還會對人體的健康造成危害。

The main source of exhaust gas from printing factories comes from the volatilization of organic solvents such as ink, toluene, gasoline, and alcohol used in the printing process. Especially during the drying process of printed materials, the total content of volatile components emitted by ink accounts for 70% -80%. Untreated emissions not only pollute the surrounding environment, but also pose a threat to human health.

印刷廠廢氣處理催化燃燒設備利用廢氣進行燃燒產生出的能量入吸附床脫附時，此時加熱裝置停止工作，有機廢氣在催化燃燒室內維持自燃，循環進行，直至有機物從活性炭內部分離，至催化室分解。余熱經過蓄熱床進行回收，便于下次加熱及余熱，能量回收效率高，能耗小，有機物得到催化分解處理。

When the catalytic combustion equipment for waste gas treatment in the printing factory uses the energy generated by combustion of waste gas to desorb in the adsorption bed, the heating device stops working, and the organic waste gas maintains spontaneous combustion in the catalytic combustion chamber, circulating until the organic matter is separated from the activated carbon and decomposed in the catalytic chamber. The waste heat is recovered through a heat storage bed, which facilitates the next heating and waste heat recovery. The energy recovery efficiency is high, the energy consumption is low, and the organic matter is catalyzed and decomposed.

催化燃燒設備能去除揮發性有機物(VOC)、無機物、硫化氫、氨氣、硫醇類等主要污染物，以及各種惡臭味，脫臭效率可達98%以上，脫臭效果大大頒布的惡臭污染物排放標準無需添加物質：只需要設置相應的排風管道和排風動力，使惡臭氣體通過本設備進行脫臭分解凈化，無需添加物質參與化學反應。

Catalytic combustion equipment can remove major pollutants such as volatile organic compounds (VOCs), inorganic substances, hydrogen sulfide, ammonia, thiols, and various odors, with a deodorization efficiency of over 98%. The emission standards for odor pollutants with greatly deodorized effects do not require the addition of substances: only corresponding exhaust pipes and exhaust power need to be set up to allow odor gases to undergo deodorization, decomposition, and purification through this equipment, without the need to add substances to participate in chemical reactions.

其具體還需根據業主現場廢氣總風量大小、凈化要求、設備運轉與建造經濟性、現場工況、廢氣濃度等具體工況綜合考慮。采用不同工藝。比如中低濃度、中高風量有機廢氣采用活性炭吸附-脫附-催化燃燒進行凈化，高濃度采用蓄熱式焚燒爐。

It also needs to be comprehensively considered based on the total amount of exhaust gas flow at the owner's site, purification requirements, economic efficiency of equipment operation and construction, on-site conditions, exhaust gas concentration, and other specific working conditions. Using different processes. For example, organic waste gases with medium to low concentrations and medium to high wind volumes are purified using activated carbon adsorption desorption catalytic combustion, while high concentrations are purified using a thermal storage incinerator.

本文由催化燃燒設備友情奉獻.更多有關的知識請點擊:http://m.dadmomgo.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from catalytic combustion equipment. For more related knowledge, please click: http://m.dadmomgo.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned